Log in to Mikrotik via Winbox. Until I setup pppoe-relay on the bridge they didnt appear on the eth1.Code: Select all # jun/01/2017 18:53:00 by RouterOS 6.40rc151. The main VLAN setting is vlan-filtering which globally controls VLAN-awareness and VLAN tag processing in the bridge.I use WRT in client routed mode and pppoe-relay server is on wireless interface. Bridge VLAN Filtering configuration is highly recommended to comply with STP (IEEE 802.1D), RSTP (IEEE 802.1W) standards, and is mandatory to enable MSTP (IEEE 802.1s) support in RouterOS.

Depending on the setup, there are various ways to configure a MikroTikвЂ™s WiFi for guest access. Networking, Security / June 1, 2017. To make the Bridge, go to the Bridge -> Add interface bridge with a click of a button + -> We could give her name Bridge -> Click Ok.Bridging Setup Let OpenVPN manage its own client IP address pool using the server-bridge directive, or configure the DHCP server on the LAN to also grant IP.Set master-port=ether1MikroTik: Setup Guest WiFi.

RSSI should be between -45 and -60 dBm.I don't think nstreme will help you stick with 802.11.Code: Select all # jun/18/2017 23:02:07 by RouterOS 6.40rc21Set disabled=yesSet ssid=MikroTikAdd authentication-types=wpa2-psk eap-methods='' management-protection=allowed mode=dynamic-keys name=wireless-bridge supplicant-identity='' wpa2-pre-shared-key=test1234Set amsdu-limit=2048 band=5ghz-onlyac channel-width=20/40/80mhz-eCee country=germany disabled=no frequency=5200 mode=bridge security-profile=wireless-bridge ssid=bridgeAP tx-power=14 tx-power-mode=all-rates-fixed wireless-protocol=nstremeCode: Select all # jun/18/2017 23:03:55 by RouterOS 6. You should have tx-power=0 or even negative in that case. Especially in LOS 1m case, RSSI is way too high.

Mikrotik Wireless Bridge Setup